How to configure RSC IP and SC IP

How to configure  RSC IP and SC IP:



we to need to add rsc package

pkgadd -d .

after adding pak in /usr/platform/`uname -i`

u will get rsc

cd rsc

rsc-config      rsc-initscript  rscadm


====================================================================================================================


RSC Console Settings
Well, most of us have done sc and alom and ilom settings. Ever heard of setting up an RSC for console with cyclades?

Follow up ...


Introduction:


The purpose of this document is to broadly define the RSC Configuration activities carried out during the server built up and the roadblocks faced herein.






1. RSC Software Download:

In the first phase of RSC configuration the RSC software was been taken from the SUN Download Centre (http://sunsolve.sun.com ) and then the individual packages within the RSC software were installed on the supported platform . The RSC software download for Solaris contains the following packages:


SUNWrsc
SUNWrscj
SUNWrscd



2. RSC Software Installation:


The below mentioned steps were followed to install the RSC software on Solaris 10 :


2.1 Login as superuser ( root )

2.2 Place the compressed file (for example, rsc_packages*.zip) in a temporary directory (for example, /tmp).

2.3 Use unzip (/usr/bin/unzip) to extract the Sun packages from the zip file. From your temporary directory, type the following command at the superuser prompt and press Return




/usr/bin/unzip rsc_packages*.zip

=====================================================rsc console setup=================================================================


root@devbiw # cd /usr/platform/`uname -i`
root@devbiw # cd rsc
root@devbiw # ls
rsc-config      rsc-initscript  rscadm
root@devbiw # ./rscadm shownetwork
IP Address: 10.22.135.131
Gateway address: 10.22.135.129
Netmask: 255.255.255.128
Ethernet address: 00:14:4f:3f:8f:64





root@devbiw # ./rsc-config


Continue with RSC setup (y|n): y

Set RSC date/time now (y|n|?) [y]:

Server Hostname [-a]: X10DB

Edit customer info field (y|n|?) [n]:

Enable RSC Ethernet Interface (y|n|s|?) [n]: y

   RSC IP Mode (config|dhcp|?) [dhcp]: config
   RSC IP Address []: 10.22.135.131
   RSC IP Netmask [255.255.255.0]: 255.255.255.128
   RSC IP Gateway []: 10.22.135.129


Enable RSC Alerts (y|n|s|?) [n]:

Enable RSC Serial Port Interface (y|n|s|?) [n]: y

   Serial port baud rate (9600|19200|38400|57600|115200) [9600]:

   Serial port data bits (7|8) [8]:

   Serial port parity (even|odd|none) [none]:

   Serial port stop bits (1|2) [1]:

Setup RSC User Account (y|n|?) [y]:

   Username []: admin

   User Permissions (c,u,a,r|none|?) [cuar]:




--------------------
Verifying Selections
--------------------


General Setup
-------------
  Set RSC date now  = y
  Server Hostname   = X10DB
  Set Customer Info = n

  Is this correct (y|n): y



Ethernet Setup
--------------
  IP Mode      = config
  IP Address   = 10.22.135.131
  IP Netmask   = 255.255.255.128
  IP Gateway   = 10.22.135.129

  Is this correct (y|n): y



Alert Setup
-----------
- Alerts disabled

  Is this correct (y|n): y



Serial Port Setup
-----------------
  Serial Port Baud      = 9600
  Serial Port Data Bits = 8
  Serial Port Parity    = none
  Serial Port Stop Bits = 1


  Is this correct (y|n): y



User Setup
----------
  User Name        = admin
  User Permissions = cuar

  Is this correct (y|n): y


This script will now update RSC, continue? (y|n): y
Updating flash, this takes a few minutes
........................................
........................................
........................................
........................................
........................................
........................................
........................................
...........................
Download completed successfully

Resetting RSC (takes about 90 seconds): DONE
Setting up server to update RSC date on boot: DONE
Setting up server hostname: DONE
Setting up ethernet interface: DONE
Disabling RSC alert engine: DONE
Disabling modem interface: DONE
Setting up serial port interface: DONE
Adding user to RSC:

rscadm: user already exists



when this script completes,
use the rscadm command to correct the error.

Resetting RSC (takes about 90 seconds):
Are you sure you want to reboot RSC (y/n)?  y